|
TruTrack™ TKS Series
Rodless
Screw Drive Actuators
|
TruTrack screw drive linear actuators offer
straighter, truer, linear motion (within 0.002
inches per inch) than any other Tolomatic
linear actuator. The TruTack actuator guidance
system uses ground linear rails and ball bearing
blocks to decrease deflection and guide the
carrier and its load. Choice of either lead screw
or timing belt linear drive systems makes these
linear actuators versatile enough to accommodate
low/high thrust and speed applications where
repeatability and low deflection are important.
|
| |
- 4 compact envelope linear
actuator sizes
- 4 different screw
sizes with acme or ball nut linear
actuator configurations
- System payloads
ranging from 100lbs to 750lbs
- 12 metric body
size screw/nut combinations
- Actuator Strokes
in any incremental length up to 96 inches
depending on screw selections and linear
actuator body size
|
Download the TKS
Data
sheet in *.pdf format.
|
| |
|
