|
|
|
|
|
Modules monitor
normally-closed emergency stop switch
circuits or safety interlock switch circuits
for a contact failure or wiring fault.
|
 |
-
ES-UA-5A/ES-VA-5A & ES-TN-1H.. Modules
-
ES-TN-14H5/ES-TN-14H6 Modules
-
ES-TA-3F1
Module
-
ES-TA-3D1
Module
-
ES-FA-9AA/ES-FA-11AA & GM-FA-10J Modules
-
ES-FA-6G
Module
 |
|
Product
Highlights:
|
- Modules
monitor up to 10 external devices for
contact failure or wiring faults.
- Module
goes into lockout mode if it detects a
fault.
- Available
voltages include 24V dc; 24V ac/dc; 115V
ac or 12 to 24V dc; or 230V ac or 12 to
24V ac/dc.
- Modules
monitor positive-opening E-stop and
interlock switches.
- Models are
available with 2 to 4 normally open safety
outputs, depending on module.
- Safety
outputs are rated 4 or 6 amps, depending
on module.
- Non-safety
auxiliary outputs are available on most
modules.
- Modules
are available with an adjustable output
delay of 0-20 or 0-200 seconds, depending
on module.
- Two
modules allow central monitoring and
control over a DeviceNet™ control network.
- Ratings
are NEMA 1 and at least IEC IP20.
- Housings
are rugged polycarbonate.
- Bright red
and green LED indicators show module's
operating status.
|
|
|
|
|
