Material:
Sheet steel Enclosure: 1.5 mm (16 ga)
Door and console lid: 2.0 mm (14 ga) Mounting
panel: 3.0 mm (11 ga)
Also available in Stainless Steel
Finish:
Enclosure, door and console lid: Dipcoat-primed,
powder-coated on the outside
Mounting panel and gland plates: Zinc-plated
Color:
Textured RAL 7035 (light gray)
Protection ratings:
IP 55 to EN 60 529/10.91, NEMA Type 12.
Configuration:
Enclosure, closed back and sides, door or double
door at front, console lid with safety catch,
two-piece gland plate, mounting panel.
|
|
|
|
Including mounting
rails for cable routing. Safety catch may be
unlatched. |
Door hinge may be
changed from right to left by unscrewing the
hinges. |
Mounting panel is
height adjustable by 2 x 40 mm (0.1 x 1.6″). |
