The Eaton Cutler-Hammer
E26 stacklight unit is a modular system that
provides illuminated and audible status indication
in all directions. Easily assembled plug-in modular
units include constant, flashing and strobe light
units, as well as mono-tonal, bi-tonal, intermittent
alarm systems. Stacklights may be assembled in a
variety of configurations. Numerous lamp, color and
mounting options further enhance the stacklight’s
versatility.
Features, Function
and Benefits
Standard
Stacklight Base
For use with
incandescent or standard LED for steady,
non-flashing illumination or with flashing LEDs
for flashing illumination. Bases include
terminal block for wiring, stacklight cover and
gasket.
Flashing
Stacklight Base
Allows
configuration of each light in the stack for
either steady or 60 times per minute flashing
illumination. Flashing circuit for use with
incandescent lamps only. (Maximum allowable
number of light modules is 2 at 12V, 4 at 24V
and 6 at 48V and above.)
Light
Modules
Available in a
variety of colors for both incandescent lamps
and LED lamps. To maximize illumination and
light dispersion, incandescent units include an
opal white diffuser while LED diffusers are
clear.
Xenon
Strobe
Sets are similar to
standard lens/diffuser units, except each set
consists of two lens units. The lower unit
includes the electronics and is permanently
fused to the upper unit which contains the Xenon
lamp. Xenon units may be placed in any position
in a complete stacklight unit. They will flash
60 times per minute when used with a standard or
flashing base.
Alarms
May be fitted to
the top of a complete stacklight unit or
directly to the stacklight bases, if desired.
Available in three versions, each with
adjust-able sound levels.
