|
|
|
|
|
|
Banner Engineering EZ-Screen Low Profile Cascade Safety Light Screen
|
|
|
The Banner EZ-SCREEN Low Profile Cascade models have continuous
detection along the entire light screen length in order to eliminate the "dead zones" found on traditional safety light curtains.
|
|
|
|
|
|
|
|
|
|
Banner Engineering EZ-Screen Low Profile Safety Light Screen Systems
|
|
|
The Banner EZ-SCREEN Low Profile models have continuous
detection along the entire light screen length in order to eliminate the "dead zones" found on traditional safety light curtains.
|
|
|
|
|
|
|
|
|
|
Banner Engineering EZ-Screen Safety Light Screen Systems
|
|
|
The Banner EZ-SCREEN provides a redundant, microprocessor controlled, opposed-mode optoelectronic “curtain of light,” or
“safety light screen.” It is generally used as a point-of-operation
safeguarding device, and is suited to safeguard a variety of machinery.
|
|
|
|
|
|
|
|
|
|
Banner Engineering EZ-Screen Grid & Point Systems
|
|
|
EZ-SCREEN (formerly known as EZ-GUARD) is a self-contained (no separate control box needed) safety light screen system. Designed for both short and long range access/perimeter guarding, this two piece safety unit has an available sensing distance up to 70 m or 230 ft
|
|
|
|
|
|
|
|
|
|
Banner EZ-Screen Type2 Light Screen Systems
|
|
|
Inexpensive, compact optical safeguarding solution is designed for lower-risk applications where risk of injury is limited but some guarding is necessary.
|
|
|
|
|
|
|
|
|
|
Banner Engineering Micro-Screen Safety Light Curtain
|
|
|
MICRO-SCREEN is suitable for most industrial applications, and takes up very little space. The tiny rectangular emitters and receivers measure only 32 x 25 mm (1/4"x 1"), and can be integrated perfectly into your products without being obtrusive.
|
|
|
|
|
|
|
|
|
|
Banner Engineering Mini-Screen Safety Light Curtain
|
|
|
MINI-SCREEN is designed for on and around heavy-duty production machinery. Full system includes emitter, receiver, controller and interconnecting cables. Emitters and receivers feature compact housing with 19, 25 and 38 mm resolution.
|
|
|
|
|
|
|
|
|
|
Banner Engineering Machine-Guard and Perimeter-Guard Systems
|
|
|
MACHINE-GUARD systems are designed for point-of-operation guarding for the most demanding industrial applications.
PERIMETER-GUARD systems are used to guard the boundaries of a dangerous area when it is possible to walk through the light screen into the area of dangerous machine motion.
|
|
|
|
|
|
|
|
|
|
Banner Engineering Pico-Guard Fiber Optic Safety Interlock System
|
|
|
PICO-GUARD is the industry’s first system designed to meet Safety Category 4, per ISO 13849 (EN 954-1)* and IEC 61496-1 Type 4 requirements, using a single switch point for each door.
|
|
|
|
