|
|
|
|
|
|
LM1 - Banner Engineering MULTI-BEAM: Logic Module, Range: depends on sensor; Input: on power block, Function: ON-OFF Light Operate, Interconnecting Pins
|
Stock
Price: $16.56
|
|
|
The LM1 is an on-off logic module that causes the power block output to "follow the action" of the scanner block: when the scanner block sees a LIGHT signal, the output is energized; when the scanner block sees a DARK signal, the output is de-energized.
|
|
|
|
|
|
|
|
|
|
LM2 - Banner Engineering MULTI-BEAM: Logic Module, Range: depends on sensor; Input: on power block, Function: alternate action, Interconnecting Pins
|
Stock
Price: $84.64
|
|
|
The LM2 provides "flip-flop" or toggling action of the power block output, such that each time the scanner block changes from a DARK state to a LIGHT state, the output changes state. The output remains in the last state until another change occurs.
|
|
|
|
|
|
|
|
|
|
LM3 - Banner Engineering MULTI-BEAM: Logic Module, Range: depends on sensor; Input: on power block, Function: ON-OFF Light or Dark Operate, Interconnecting Pins
|
Stock
Price: $28.52
|
|
|
The LM3 is an on-off logic module that has the ability to be programmed for either LIGHT operate or DARK operate.
|
|
|
|
|
|
|
|
|
|
LM4-2 - Banner Engineering MULTI-BEAM: Logic Module, Range: depends on sensor; Input: on power block, Function: one-shot (retriggerable), Interconnecting Pins
|
Stock
Price: $65.32
|
|
|
The LM4-2 provides a one-shot ("single shot") output pulse each time there is a transition from LIGHT to DARK (jumper installed) or from DARK to LIGHT (jumper removed).
|
|
|
|
|
|
|
|
|
|
LM4-2NR - Banner Engineering MULTI-BEAM: Logic Module, Range: depends on sensor; Input: on power block, Function: one-shot (non-retriggerable), Interconnecting Pins
|
Stock
Price: $65.32
|
|
|
The LM4-2NR provides a one-shot ("single shot") output pulse each time there is a transition from LIGHT to DARK (jumper installed) or from DARK to LIGHT (jumper removed).
|
|
|
|
|
|
|
|
|
|
LM5 - Banner Engineering MULTI-BEAM: Logic Module, Range: depends on sensor; Input: on power block, Function: ON-delay, Interconnecting Pins
|
Stock
Price: $65.32
|
|
|
The LM5 is a true "on-delay" type logic module. The input signal must be present for a predetermined length of time before the output is energized. The output then remains energized until the input signal is removed.
|
|
|
|
|
|
|
|
|
|
LM5R - Banner Engineering MULTI-BEAM: Logic Module, Range: depends on sensor; Input: on power block, Function: OFF-delay, Interconnecting Pins
|
Stock
Price: $65.32
|
|
|
The LM5R is an "off-delay" logic module, similar to the LM5, except that timing begins on the trailing edge of the input signal. When the input occurs, the output is immediately energized; if the input is then removed, the output remains energized for the adjustable pre-determined time period, then de-energizes.
|
|
|
|
|
|
|
|
|
|
LM5-14 - Banner Engineering MULTI-BEAM: Logic Module, Range: depends on sensor; Input: on power block, Function: ON & OFF delay, Interconnecting Pins
|
Stock
Price: $78.20
|
|
|
The LM5-14 combines the function of an "on-delay" and an "off-delay" into one logic module.
|
|
|
|
|
|
|
|
|
|
LM5T - Banner Engineering MULTI-BEAM: Logic Module, Range: depends on sensor; Input: on power block, Function: limit timer, Interconnecting Pins
|
Stock
Price: $65.32
|
|
|
The LM5T "limit" timer combines the function of on-off logic and on-delay logic.
|
|
|
|
|
|
|
|
|
|
LM6-1 - Banner Engineering MULTI-BEAM: Logic Module, Range: depends on sensor; Input: on power block, Function: rate sensor, Interconnecting Pins
|
Stock
Price: $84.64
|
|
|
The LM6-1 is a true overspeed or underspeed sensing logic module that monitors signals from a scanner block and continuously calculates the time between input signals, and compares that time with the reference set by the "HOLD" potentiometer. A jumper allows the mode to be changed from overspeed (jumper installed) to underspeed (jumper removed).
|
|
|
|
|
|
|
|
|
|
LM8 - Banner Engineering MULTI-BEAM: Logic Module, Range: depends on sensor; Input: on power block, Function: repeat cycler, Interconnecting Pins
|
Stock
Price: $78.20
|
|
|
The LM8 is a repeat cycle timing module with independently adjustable delay and hold times.
|
|
|
|
|
|
|
|
|
|
LM8-1 - Banner Engineering MULTI-BEAM: Logic Module, Range: depends on sensor; Input: on power block, Function: delayed one-shot, Interconnecting Pins
|
Stock
Price: $78.20
|
|
|
The LM8-1 is a delayed one-shot that functions very much like two individual one-shots, with the end of the first initiating the second.
|
|
|
|
|
|
|
|
|
|
LM8A - Banner Engineering MULTI-BEAM: Logic Module, Range: depends on sensor; Input: on power block, Function: ON-delay one-shot, Interconnecting Pins
|
Stock
Price: $78.20
|
|
|
The LM8A differs slightly from the LM8-1. It too incorporates both a delay and a hold time, except that the delay is a true on-delay.
|
|
|
|
|
|
|
|
|
|
LM10 - Banner Engineering MULTI-BEAM: Logic Module, Range: depends on sensor; Input: on power block, Function: +10 counter, Interconnecting Pins
|
Stock
Price: $84.64
|
|
|
The LM10 is a fixed-count divide-by-ten logic module, with neither timing nor LIGHT/ DARK operate functions.
|
|
|
|
|
|
|
|
|
|
LMT - Banner Engineering MULTI-BEAM: Test Module, May be used with all 2- 3- and 4-wire MULTI-BEAM, sensors to check operation of sensor block, and power block
|
Stock
Price: $54.28
|
|
|
The LMT is a plug-in test logic module for use when troubleshooting MULTI-BEAM sensors.
|
|
|
|
